Wireless -- Security

This page allows you to configure security features of the wireless LAN interface.
You may setup configuration manually
        OR
through WiFi Protected Setup(WPS)
Note: When the STA PIN is empty, PBC is used. If Hide Access Point enabled or Mac filter list is empty with "allow" chosen, WPS will be disabled.
    


WPS Setup

      Enable WPS

      Enable Build-In Registrar

      Add Client (This feature is available only when WPA2 PSK, Mixed WPA/WPA2 PSK or OPEN mode is configured)
Push-Button
Enter STA PIN Use AP PIN     		  
     Help


      Set WPS AP Mode

      Setup AP (Configure all security settings with an external registar)

      Device PIN    Help


Manual Setup AP

You can set the network authentication method, selecting data encryption,
specify whether a network key is required to authenticate to this wireless network and specify the encryption strength.
Click "Apply/Save" when done.

Select SSID:
Network Authentication:

WPA2 Preauthentication:
Network Re-auth Interval:
WPA/WAPI Passphrase:    Click here to display
WPA Group Rekey Interval:
RADIUS Server IP Address:
Secondary RADIUS Server:
RADIUS Port:
RADIUS Key:
WPA/WAPI Encryption:
WEP Encryption:
Encryption Strength:
Current Network Key:
Network Key 1:
Network Key 2:
Network Key 3:
Network Key 4:
  Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys
  Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys


   

WAPI Certificate
Certificate Status:  
ASU Certificate File:
User Certificate File: